Smart façade for innovation campus
Bühler AG CUBIC innovation campus, Uzwil, Switzerland
Bühler AG CUBIC innovation campus, Uzwil, Switzerland
To create a new basis for collaboration with customers, startups and partners from science and industry, Uzwil-based technology group Bühler built a groundbreaking innovation campus. The façade is just as technologically sophisticated as the smart building concept – the tintable electronic all-glass façade made of SageGlass provides solar protection, allowing a previously unattainable level of openness and transparency in design, contributing to the building’s unique aesthetic.
The Bühler AG innovation campus consists of two elements: the CUBIC innovation building and the adjoining application centers, which were modernized at the same as the new building. The new campus for the Swiss technology group, which provides leading process solutions in the food, feed and mobility markets, brings together research, development, prototyping, engineering, production and education. The aim is to transform the pressing challenges faced in an era of healthy eating and clean mobility into new solutions and business.
State-of-the-art office design
The three-story steel frame construction of the CUBIC building appears to float above the modernized test halls. The construction rests on a two-part entrance core with connecting bridges to the high-rise buildings and the customer center. The upper floors are supported by a steel catching table. All the supporting elements, stairways, elevators and technology in the building concentrate on three concrete cores, which, together with the three courtyards and three double-story halls, form the core of the building. Around this core, open office environments span two floors, providing maximum flexibility and full contact with the communal areas in the center of the CUBIC building.
With its industrial atmosphere, the workshop effect was chosen deliberately: the CUBIC building is a space for collaborative research and development, a state-of-the-art co-working space for the project teams of the Bühler staff, startups, customers, industry partners and university teams. For the floor plan, architect Carlos Martinez drew inspiration from the image of a centrifuge: the ideas developed collaboratively in the core are “catapulted” into the outer office areas, where they are fleshed out by small and large work units. The results are then taken back into the auditoriums in the center for presentation, so that they can be tested on prototypes and models in the “maker space” at a later stage, before receiving the finishing touches in the ring of offices.
Smart solar protection
Even in the first drafts, a smooth glass shell was planned for the façade of the CUBIC building, designed to convey the concept of openness outwards, too. The curtain façade of large glass elements measuring 1,12 x 3,05 m is supported by an internal frame construction, which is connected to the building’s support structure with brackets. A third of the 535 glass elements were designed as opening elements. The swinging elements can be opened automatically for ventilation and smoke extraction in the event of a fire. The exterior view of the all-glass surface has a uniform, delicate appearance and is divided only by thin joints between the glass elements. This façade design was used on all the vertical façades, including in the three courtyards.
The structural glazing façade was built using Vario solar protection glass by SageGlass. Thanks to its tinting electrochromic coating, the smart glass can control the heat influx from sunlight – all while staying transparent and offering an unobstructed view of the outdoors. SageGlass Vario is a certified design variant for challenging all-glass façade applications. Even in bright conditions, the coating on the inside of the glass blocks heat from the sun before it enters the building. The CUBIC building required no external solar protection as a result. A total of 1 600 m² of SageGlass was installed – 450 m² of which was used for the courtyard façades.
Smart façade
To maximize the flexibility of the space, the façade was divided into small sections. Two of each of the triple-glazed elements form a zone that can be tinted individually. This is important for controlling the solar protection, as the building’s façades are shaded to varying degrees by the neighboring buildings. Areas can also be reallocated when the room layout is changed to support flexible use of space. The façade tinting system is linked via a BACnet interface to the internal building management system, which is used to monitor and manage the entire building. In addition to automatic tinting via sensors that respond directly to changes in sunlight, the façade at the CUBIC building can also be controlled manually with touch panels.
When the sun shines, the façade darkens, constantly changing its appearance. A major advantage of SageGlass is its constant ability to react to its surroundings, even when tinted. This is much more beneficial to the employees in the building compared with internal or external solar protection. Moreover, the transition between the different tint levels is smooth and completely silent, preventing any disruption of operations.
About SageGlass
SageGlass® is the pioneer of the world’s smartest dynamic glass. Electronically tintable SageGlass tints or clears automatically to optimize daylight levels while preventing heat and glare, without the need for blinds or shades. SageGlass delivers superior comfort, enhances occupant wellbeing and saves energy. As a subsidiary of Saint-Gobain, SageGlass is backed by more than 350 years of building science expertise that only the world leader in sustainable environments can provide.
Find out more at www.sageglass.com or on Twitter, Facebook and LinkedIn.
About Saint-Gobain
Saint-Gobain develops, manufactures and distributes materials and solutions that make a key contribution to the wellbeing of people and our future. These materials surround us in our living spaces and daily lives – in buildings, transport, infrastructure and in many industrial applications. Saint-Gobain’s system solutions provide comfort, performance and safety while also addressing the challenges of sustainable construction, resource efficiency and climate change.
- EUR 40.8 billion in sales in 2017
- Operates in 67 countries
- More than 179,000 employees
- www.saint-gobain.com
More information:
SageGlass
Kerstin Nanchen
T +41 31 336 81 54
Bernstrasse 43
3175 Flamatt, Switzerland
kerstin.nanchen@saint-gobain.com
Press contact
Proesler Kommunikation
Tristan Staack
T +49 7071 234-16
F +49 7071 234-18
Karlstraße 2 • 72072 Tübingen, Germany